一．機床的主要用途和特點

    本機床是能夠使用多種加工方法，加工最大直徑500毫米，最大模數12毫米的弧齒錐齒輪，零度齒錐齒輪及準雙曲面齒輪的數控弧齒錐齒輪銑齒機。特別適于成批或大量生產中粗、精加工轎車、輕中型卡車和工程機械等車橋用傳動的主動輪加工。

二．機床主要性能和結構特點

1．本機床系三軸數控弧齒錐齒輪銑齒機，即搖臺運動（X軸），工件主軸運動（Y軸）、床鞍進給運動（Z軸）。

   三軸均可實現數控軸控制和聯動。刀盤的旋轉（S軸）速度由變頻電機控制實現無級調速。

2．本機床搖臺和工件箱部件均采用高精度雙導程蝸輪副傳動，并采取了多項增強結構剛性和傳動剛性的措施，

   保證了本機床加工精度并提高了機床生產率和使用壽命。

3．本機床裝有最大刀傾角為30°的刀具主軸傾斜機構，不但可加工最小傳動比為2.5：1的半滾切主動輪，

   而且能實現更好的輪齒接觸區修正。

4．本機床調整無需更換掛輪，減少了機床調整時間。

5．本機床采用數控設定的進給運動，簡化了用戶操作并有利于提高切齒效率。

6．機床的數控系統，主要電氣、液壓元件、軸承和密封件均采用優質進口件，從而保證了機床的可靠性。

7．本機床配置獨立密封的電氣控制柜，可選配空調或熱交換器。

8．本機床可配置安全防護罩和自動排屑器。

1. Main Usage of Machine

On this machine, many cutting methods can be adopted for roughing and finishing Spiral Bevel, Zero Bevel and Hypoid Gears up to 500mm in diameter and 12 mm in module. The machine is most suitutable for batch production or mass production of driving pinions of gear pairs used in cars, light and medium-sized trucks and construction machineries.

2. Main Features and Structural Characteristics of Machine

1. The machine is designed to operate as a three axes CNC control Spiral Bevel Gear Generator, i.e. cradle oscillation (X axis), work spindle rotation (Y axis) and sliding base movement (Z axis). Each of three axes will be separately or simultaneously controlled. The rotation of cutter spindle (S axis) is controlled by an AC frequency variable motor for its stepless control.

2. A high precision dual-leads worm gear set is used for cradle drive and work spindle drive respectively, and many measures are adopted for improving the structural and driving rigidity of machine, so as to ensure the machining accuracy, productivity and operating lifes.

3. A cutter tilt mechanism with maximum tilt angle 30°is designed for the cutter spindle for cutting the pinions to mesh with non-generated gears (minimum gear ratio 2.5:1) and getting better tooth bearing correction.

4. There are no any change gears on the machine for minimizing the setting time of machine.

5. The feeds of machine are controlled by CNC programme, so as to simplify the operation and increase the cutting efficiency.

6. CNC control system, main electrical and hydraulic components, critical bearings and sealings are fine quality imports, which guarantee the machine reliability.

7. The machine is equipped with an independent sealed electrical cabinet, which is with air conditioner or thermo exchanger.

8. Safety guards and auto-chip conveyor can be provided on the machine.

三．機床主要技術規格

3. Main Technical Specifications of Machine